Enjoybot 14.6V 40A Mountable Dual-Purpose LiFePO4 Lithium Battery Charger
Enjoybot 14.6V 40A lithium battery charger is specifically designed for 12.8V LiFePO4 lithium batteries. Its large current of 40A enables rapid charging, taking only 5 hours to fully charge a 12V 200Ah battery, and as well as 10 hours for a 12V 400Ah battery system.
[Dual-Purpose Charger] The lithium battery charger can be used portably or for mounted installation. It utilizes a reliable and safe Anderson interface, offering two charging options: alligator clips and rings.
[Efficient and Convenient] The lithium battery charger control circuit adopts advanced LLC half-bridge resonant soft switching power supply control technology, reasonable structure and good heat dissipation design, making the charger small and light, easy to carry.
[Smart Charging Mode] Switching power supply type and MCU controlled charging technologies, exclusive precharge mode supplies activate, repair and prolonging life functions for long-term unused or deep sleep batteries. Advanced charging modes: pre-charge (T1), fast charge (T2) and float charge (T3) for efficient charging.
[Multiple Protections] The charger is reliable with multiple protections, such as over temperature protection, output short-circuit protection, reverse polarity protection,over-current protection, over-voltage protection, under-voltage protection, that prevent damage by faulty operations.
[Reliable and Durable] The charger case is made of aluminum alloy with surface oxidation treatment, high-grade,fashion,good heat dissipation ability,high hardness,antioxidative, non-fading.
[Warranty and Service Support] Our LiFePO4 charger has a 2-year warranty, and we provide professional technical support and customer service. If you have any questions, please feel free to contact us.
Use Method:
1) Close the power switch firstly.
2) Connect the batteries to the output socket with output wires—positive to positive, negative to negative.
3) Plug the input wires correctly and connect to the input power source then.
4) Open the power switch, LED flashes blue means battery is being charged.
5) LED always green means battery is fully charged, switch off the charger.
6) Disconnect he input cable.
7) Disconnect the output wires.
Specification:
| Output Voltage: | DC 14.6 Volt |
| Output Current: | 40 Amps |
| Condition: | New |
| Input Voltage: | AC100-240 V |
| Input Voltage Frequency: | 50-60 Hz |
| Battery Type: | Preset for LiFePO4 battery |
| Operating Temperature: | 14°F - 104°F (-10°C - 40°C) |
| Storage Temperature: | -40°F - 158°F (-40°C - 70°C) |
| Dimensions: | L 11.4" x W 5.43" x H 3.38" (290*138*86mm) |
| Input Line Length: | 59 inch |
| Wire Stripping: | 23.6 inch, Expanded to 47.24 inch |
| Output line Length: | 59 inch |
| Net weight: | 2.4 KG / 2.2 lbs |
| Input plug: | US standard |
| Output plug: | Ring Terminal / Alligator Clips |
