Enjoybot 12V 150Ah Group 31 Bluetooth LiFePO4 Lithium Battery With Self-Heating, 1920Wh, 150A BMS
Pay with Ease
Voltage: | 12V (12.8V) |
Rated Capacity | 150 Ah, 1920 Wh |
BMS | 150 A |
Max. Output Power | 1920 W |
Feature | Bluetooth, Self-Heating |
Dimensions | 12.95 x 6.77 x 8.42 in |
BCI Group | Group 31 |
Weight | 31.6 lbs |
Terminal | M8*16mm (L) |
Cell Type | Grade A LiFePO4 Prismatic Cells |
Case Material | ABS Plastic |
Waterproof Rating | IP67 |
Max. Continuous Charging Current | 75A |
Max. Continuous Discharging Current | 150A |
Peak Discharge Current | 500A (3-5 Seconds) |
Charge Voltage | 14.2V-14.6V |
Recommend Charge Current | 40A |
Max. Batteries in Series | 4 Packs |
Ideal Max. Batteries in Parallel | 1-4 Packs |
Max. Batteries in Parallel | 10 Packs |
Max. Configuration | 4S4P (build 48V 600Ah battery system) |
Charge Temperature | -4℉ ~ 131℉ (-20℃ ~ 55℃) |
Discharge Temperature | -4℉ ~ 140℉ (-20℃ ~ 60℃) |
Storage Temperature | 14℉ ~ 122℉ (-10℃ ~ 50℃) |
Search for "BAT-BMS" in your app store, or click onthe app store links below to download now!
- Golf Cart
- Trolling Motor
- RV & Campers
- Solor & Home Backup
* Note: Our lithium golf cart battery pack is designed to support golf carts with a motor power of up to 5kW and a maximum controller current of 500A.
* Note: This is a deep cycle battery, not designed for starting engines or cranking battery.
Questions & Answers
Have a Question?
-
What voltage should a 12V 150ah be when fully charged?
The fully charged voltage of each battery may vary slightly, but if the voltage is above 13.38V after charging, it will be fine.
-
Can I use my charger that came with my EZGO golf cart? The last time i charged my cart it showed 50.4 on my voltmeter. Also, would I have to buy a reducer to work the 12 volt stuff or could I hook them up to just one of the battery. Thanks for your help, Greg
The original charger of the golf cart is usually designed for lead-acid batteries. It is recommended that you check whether it will work for LiFePO4 batteries. The correct charging voltage should be 56.8V-58.4V.
Yes, you will need a voltage reducer. Do not connect 12V accessories directly to one of the 12V batteries, this will cause voltage imbalance between the batteries. -
Is the measurement of the type 31 battery from the bottom to the top of the battery post?
Dimensions are those of the battery itself and do not include the battery terminals that will be mounted on it.
-
Well a NOCO genius gen 5x2 12V 10A 2 bank 5a each bank on board changer good to use for these batteries?
Yes, this charger will work for our batteries.