Enjoybot 14.6V-20A LiFePO4 Lithium Battery Charger Alligator Clamps
Subcribe to back in stock notification
It is a light weight, high frequency type charger for charging 12V batteries made with Lithium Iron Phosphate cells. The 20A of output typically recharges 12V Lithium Ion batteries with ease(Actual recharge time varies by specific application and energy consumed).
[12V LiFePO4 Battery Charger] A smart charger specially designed for 12V (12.8V) LiFePO4 batteries. Our charger supports 0V charging function to reactivate or repair batteries that have not been used for a long time. Advanced charging modes: Pre-charge(T1), Fast charge(T2), and Float charge(T3) for efficient charging.
[Efficient and Convenient] The Lithium battery charger control circuit adopt advance LLC half.bridge resonant soft-switching power supply control technology, proper structure as well as nice thermal design make the charger small and light with good portability.
[High Reliability] The charger is made of high quality military and industrial levels components, advanced circuit design and strict production process. The charger case is made of aluminum alloy with surface oxidation treatment, good heat dissipation ability, high hardness, antioxidant, non- fading.
[Multiple Protection] The charger is reliable with multiple protections, such as over temperature protection.output short-circuit protection, reverse polarity protection, output over-voltage protection, that prevent damage by faulty operations.
[Quick Charge] With this Lithium Iron Phosphate Battery Charger, it only takes 5 hours to fully charge a 12V 100Ah LiFePO4 battery, ideal for 20Ah and above LiFePO4 batteries.
[Warranty and Service Support] Our LiFePO4 charger has 2 years warranty, we provide professional technical support and customer service. If you have any questions, please feel free to contact us.
1) Close the power switch firstly.
2) Connect the batteries to the output socket with output wires-positive to positive,negative to negative.
3) Plug the input wires correctly and connect to the input power source then.
4) Open the power switch, LED always red means battery is being charged.
5) LED always green means battery is fully charged, switch off the charger.
6) Disconnect he input cable.
7) Disconnect the output wires.
|Output Voltage:||DC 14.6 Volt|
|Output Current:||20 Amps|
|Output Power:||292 watt|
|Input Voltage:||AC100-240 V|
|Input Voltage Frequency:||50-60 Hz|
|Battery Type:||Preset for LiFePO4 battery|
|Operating temperature:||-10°C - 45°C|
|Storage temperature:||-40°C - 75°C|
|Dimensions:||L 8" x W 3.93" x H 2.12" (203*100*54mm)|
|Input line length:||4 ft|
|Output line length:||4 ft|
|Net weight:||1.3 KG / 2.86 lbs|
|Input plug:||US standard|
|Output plug:||Alligator Clips|